automatic electrode die cutting machine

This machine is suitable for automatic forming of anode and cathode sheet (continuous coating) of lithium ion battery, adopting the way of punching and cutting of hardware mould.Artificial plate coil installation to equipment of gas rose axis, equipment automatically put volume, action mechanism of

17 people are viewing this right now

This machine is suitable for automatic forming of anode and cathode sheet (continuous coating) of lithium ion battery, adopting the way of punching and cutting of hardware mould.Artificial plate coil installation to equipment of gas rose axis, equipment automatically put volume, action mechanism of pole piece rolling automatic correction, and through the tension of a tension control system control sheet, plate after secondary rectification, conveying mechanism to pull the sheet to the die cutting station, by conveying mechanism to continue traction to the cutting station, automatic cutting and sheet piece material, through the vacuum charge transfer belt feeding plate, plate surface dust treatment, are collected to the finished product material box, box filled with material automatically after into the conveyor line, empty box automatically transferred to the material location, or by artificial more refueling box.


I. Technical Parameters

(1). Punching each electrode, just replace the punching knife;

(2). Piece punching efficiency: 80/min

(3). Punching knife life: >15,000 times;

(4). The man-machine interface has the setting parameters of the number of pole pieces, the error display prompt function; the automatic counting function;

(5). Depending on the sensor to accurately detect the position of the white space, automatically eliminate the coating accumulation error of the pole piece; positioning accuracy ± 0.5 mm

(6). The maximum size of the laser cutter is: width 200x length 200mm;

(7). Qualification rate of equipment products: ≥98% (bad goods caused only by the machine);

(8). Equipment utilization rate: ≥95%

(9). Applicable die type: metal die


Equipment parameter :

Cutting accuracy(mm)

±0.2mm

Feeding accuracy

≤0.02

Transverse deviation correction accuracy

±0.5

Edge powder drop range

±0.1mm

Burr length(mm)

≤0.02

work efficiency(ppm)

80/Min

Knife line distance

2 MM

 

Electrode sheet

Length (mm)

Roll

Width(mm)

≤200

 

Thickness(mm)

 

0.06-0.3


You May Also Like

Transfer/ slot die coating machine

Slot Die Coating Machine GN-360S

Automactic electrode punching machine (with cuttin

automatic electrode die cutting machine

Vacuum oven ( stroage electrode)

Vacuum drying oven

Transfer/ slot die coating machine

Automatic Slot Die Coating Machine

Transfer/ slot die coating machine

Automatic Intermittent coating machine

Slurry mixing machine/Automatic feeding system

Double Planetary Vacuum Mixing Machine