Introduction:

1) This machine is mainly used for the automatic liquid injection and packaging process of pouch cell lithium-ion batteries. It can realize the functions of manual battery loading, weighing before liquid injection, automatic liquid injection, automatic standing, automatic vacuum sealing, weighing after liquid injection, manual discharging, etc.;
2) The equipment is placed in the drying room, and the outlet is connected to the drying room;
3) Manually place the battery on the turntable fixture;

Product specification:

Equipment technical parameters:
1.Injection station: 1
2．Vacuum value during vacuum injection：-80Kpa；
3．Vacuum standing station: 2
4．Vacuum standing time:1~99S can be set
5．Vacuum value of standing cavity:-40Kpa,-60Kpa,-90Kpa（Standing cavity line and ball valve control）；
6．Vacuum sealing station: 2
7．Sealing head width: 5mm
8．Seaing head operating temperature: MAX 250℃, Maximum temperature difference at each sealing head point :±5ºC;
9．Vacuum value of sealing Cavity:－90Kpa；
10．Equipment capacity： 4-6PPM
11．Excellent product rate :  99%(excluding defective incoming materials)
12: Equipment failure rate  ≤5%(Troubleshooting caused by equipment only)；
13．Injection accuracy requirements：±0.05g
 Battery cell weight not exceeding 2.0 KG. after electrolyte injection

Technical parameters:
1. Equipment electrical: voltage 380V, current AC, single-phase, power 10KW
2. Compressed air: 6 standard atmospheres
3. Vacuum flow：350 m3 / h
4. Weight：About 2800Kg. The ratio of total weight to load-bearing area ≤500kg/M2.
5. Overall dimensions (approximately): Length: 8500; Width: 2280; Height: 2200 (MM)