Rotating type vacuum pump machine
5.0
Read 174 reviewsThe equipment is suitable for the final vacuum pumping and sealing of small and medium-sized lithium pouch battery cores after filling and grading.Essential parameter: 1Configuration requirementsPower supply:AC220V±10% /50Hz Power:3KWCompressed air:0.6~0.7MPa  
17 people are viewing this right now
The equipment is suitable for the final vacuum pumping and sealing of small and medium-sized lithium pouch battery cores after filling and grading.
Essential parameter:
1 | Configuration requirements | Power supply:AC220V±10% /50Hz Power:3KW |
Compressed air:0.6~0.7MPa 10L/s (Customer self-provided) | ||
Vacuum degree:≤-0.095MPa | ||
2 | Outline dimension | Lx Wx H ≈900x700x1500mm |
3 | Equipment weight; | About 0.5 T |
4 | Colour | We can make the color of the equipment according to customer’s request. |
Technical parameter:
1 | Inner cavity specification | Length≤80-200mm(include tab), width≤120mm(include Airbags), battery thickness: 4-10mm |
2 | Sealing head length | ≤200mm |
3 | Sealing head width | Width: 4mm |
4 | Sealing thickness | 0.11-0.153mm |
5 | Sealing head temperature | Room temperature to 260℃ adjustable. It can set compensation, control accuracy ±5 |
6 | Airbag width | 45mm |
7 | Vacuum degree | -0.095MPa |
8 | Sealing time | 0-10s adjustable |
9 | Vacuum pumping time | 0-99.99s adjustable |
10 | Rotary feeding accuracy | ±0.05mm(High speed precision cam splitter accuracy) |
11 | Sealing head parallelism | ±0.01mm. Test can use triple carbon-free paper, sealing head pressure at 0.6 Mpa, temperature at 200℃ can press uniform seal. |
12 | Equipment capacity | 1-2 PPM(Small cells can seal multiple cells simultaneously) |
Technological properties:
1.Double-station turntable cam splitter drive, with self-locking function;
2.The turntable and cavity are made of corrosion-resistant materials (aluminum oxide white);
3.The sealing temperature, pumping time and sealing time can be preset; 4. Independent temperature control of upper and lower sealing heads, with alarm function for over low and over high temperature;
4.The air supply pressure of the sealing head cylinder can be adjusted and displayed;
5.Digital display of vacuum, clear display, convenient setting and adjustment;
6.The battery has a pressure plate to be flattened and compressed (the edge of the pressure plate is less than 1mm from the edge of the rail);
7.Special clamps, press the battery so that it will not move or run off during puncture, and prevent the electrolyte in the battery from being squeezed to the edge of the vacuum seal and lost;
8.The parallelism of the upper and lower sealing heads: ±0.01mm; the degree of alignment can be adjusted by the adjustment mechanism;
9.The upper head and bayonet can be automatically raised and separated from the vacuum chamber, and the lower head chamber is easy to disassemble, which is convenient for maintenance and repair;
10.Configure the electrolyte separation barrel, optimize the electrolyte drainage channel, and reduce the pollution of the vacuum source;
11.Set up safety door switch protection;
12.Use programmable controller PLC to realize automatic control, touch screen to realize man-machine dialogue, convenient operation and setting;
13.With output statistics function, with manual and automatic operation functions, fault alarm function;
14.The whole machine is safe and stable in operation, reliable in control and convenient in operation;
15.The upper and lower heat sealing heads need to be made separately from the heating seat (for easy replacement of the heat sealing head).