Coin Cell Hydraulic Crimping Machine GN-CC20
5.0
Read 515 reviewsThe equipment mainly drives the hydraulic pump with a hand rocker rod, put the battery into the mold, drives the hand rocker rod, automatically closes the upper and lower dies, forms the battery seal.It applies to the production of the coin cell battery with samples developed by the laboratory batte
17 people are viewing this right now
The equipment mainly drives the hydraulic pump with a hand rocker rod, put the battery into the mold, drives the hand rocker rod, automatically closes the upper and lower dies, forms the battery seal.It applies to the production of the coin cell battery with samples developed by the laboratory battery materials. Capacitor scientific research seal, can also be used in the factory small batch trial production. Different molds can also be used in dry powder pressing, wet powder pressing, nickel foam pressing, pressing forming, riveting and so on.
1. Sealing pressure Min.80Kg, Max.1400Kg
2. Sealing stroke 30mm
3. Pressure accuracy ± 1.5%
4. Sealing beat :14 seconds/set (refer to CR2032 battery)
5. Sealing mold CR20 series packaging mold is optional, can be customized according to customer requirements
6. Optional or add CR16, CR20, CR24, CR30 and other specifications
7. Weight about 35Kg