Electric coin cell crimping machine GN-CC20E

This equipment is mainly driven by motor,After putting the battery in the mold, click the start button, and the lower mold automatically rises,When the pressure reaches the set pressure, the lower die rises automatically.In the process, the battery sealing is formed. This crimping machine mainly use

17 people are viewing this right now

This equipment is mainly driven by motor,After putting the battery in the mold, click the start button, and the lower mold automatically rises,When the pressure reaches the set pressure, the lower die rises automatically.In the process, the battery sealing is formed. This crimping machine mainly uses for sample making of coin cell in lab battery materials research, capacitor research sealing and can also be used in the factory less batch trial production.  Different molds can also be used for dry powder pressing, wet powder pressing, nickel foam pressing, pressing molding, riveting and so on.

Technical Parameter
1.Source voltage: single phase 220VAC±10%(Customizable 110VAC/60Hz), frequency: 50Hz, power: 500W
2. Sealing pressure: Min.80Kg, Max.1400Kg(Pressure can be adjusted on the panel)
3.Sealing stroke: 30mm
4.Pressure precision±1.5%
5.Sealing cap beat 14 s / unit (refer to CR2032 battery)
6. The sealing die CR20 series sealing mold is optional and can be customized according to the requirements of the customer
7. Disassembly die:Various specifications, such as CR16,CR20,CR24,CR30, etc., can be selected or added.
8.Weight: about 35Kg

You May Also Like

Slurry preparing equipment

Vacuum Mixer (150/500ml)

Coin cell assembly equipment

Coin Cell Hydraulic Crimping Machine GN-CC20

Coin cell assembly equipment

Electric coin cell crimping machine GN-CC20E

Coin cell testing equipment

8 Channels Coin/Button Cell Testing Board

Coin cell testing equipment

Swagelok-type cells

Coin cell assembly equipment

Single Port Glove Box with H2O&O2<1PPM