Automatic die cutting machine(hardware knife die)

This machine is suitable for automatic forming of anode and cathode sheet (continuous coating) of lithium ion battery, adopting the way of punching and cutting of hardware mould.Artificial plate coil installation to equipment of gas rose axis, equipment automatically put volume, action mechanism of

17 people are viewing this right now

This machine is suitable for automatic forming of anode and cathode sheet (continuous coating) of lithium ion battery, adopting the way of punching and cutting of hardware mould.Artificial plate coil installation to equipment of gas rose axis, equipment automatically put volume, action mechanism of pole piece rolling automatic correction, and through the tension of a tension control system control sheet, plate after secondary rectification, conveying mechanism to pull the sheet to the die cutting station, by conveying mechanism to continue traction to the cutting station, automatic cutting and sheet piece material, through the vacuum charge transfer belt feeding plate, plate surface dust treatment, are collected to the finished product material box, box filled with material automatically after into the conveyor line, empty box automatically transferred to the material location, or by artificial more refueling box.


I.Technical Parameters
(1). Punching each pole piece, just replace the punching knife;
(2). Piece punching efficiency: 80/min
(3). Punching knife life: >15,000 times;
(4). The man-machine interface has the setting parameters of the number of pole pieces, the error display prompt function; the automatic counting function;
(5). Depending on the sensor to accurately detect the position of the white space, automatically eliminate the coating accumulation error of the pole piece; positioning accuracy ± 0.5 mm
(6). The maximum size of the laser cutter is: width 200x length 200mm;
(7). Qualification rate of equipment products: ≥98% (bad goods caused only by the machine);
(8). Equipment utilization rate: ≥95%
(9). Applicable die type: metal die

II. Equipment parameter :

Cutting accuracy(mm)±0.2mm
Feeding accuracy≤0.02
Transverse deviation correction accuracy±0.5
Edge powder drop range±0.1mm
Burr length(mm)≤0.02
work efficiency(ppm)80/Min
Knife line distance2 MM
 
Electrode sheet
Length (mm)Roll
Width(mm)≤200
 
Thickness(mm)
 
0.06-0.3


You May Also Like

Electrode Calendar Machine

Roller machine Φ210×330mm/80T

Automatic forming machine (With Punching Die)

Automatic die cutting machine(hardware knife die)

Vacuum Oven (Vacuum preservation electrode)

Vacuum Drying Oven

transfer/extrusion coating machine

Automatic extrusion coating machine

transfer/extrusion coating machine

Automatic Intermittent coating machine

Slurry filtration

Slurry iron removal filter