This equipment is mainly suitable for the packaging of the top and side of the pouch cell.

It is transmitted to the head (copper) through the resistance heating tube, and uses the heat conduction effect to act on the packaging material (aluminum-plastic film) of the lithium battery. Under a certain pressure, it is heated and softened and close to the molten state to complete the compression Fusion. And do not change the mold to achieve top and side seal.

 Equipment characteristics:
 
1. Unique safety protection and anti-scalding design, the temperature of the upper and lower scalding heads can be adjusted by the temperature controller panel button and the current value of the temperature; the head is made of copper material, with good heat transfer effect, saving power consumption and improving work Efficiency, energy saving than similar products; the pressure of the upper and lower heads can be adjusted by the pressure regulating valve to meet the requirements of different process parameters;
2. The upper and lower seal heads are driven by two linear guide sleeves and guided by two linear guide sleeves, which are flexible up and down, and the guidance is accurate to ensure the parallelism requirements of the product after sealing; it can be applied to product batteries of different specifications, and the adjustment is simple and convenient, no need to adjust and replace the seal Head; the frame is made of aluminum profile, which has a beautiful appearance; the sheet metal adopts a three-dimensional geometric design, which is simple and beautiful;. The outline size is small, the sealing mark is flat and uniform, and the edge sealing appearance is beautiful;
 
Technical Parameters:
 
1. Compressed air: ≥6kg/cm2
2. Applicable specifications: side seal ≤190mm, top seal ≤190mm (with air bag) (can be customized according to requirements)
3. Upper mold soft sealing temperature: standard 200℃ (temperature freely set)
4. Lower mold temperature: standard 160℃-200℃ (temperature can be set freely)
5. Packaging time: standard 2S-3S (0-99s adjustable)
6. Air compressor working speed: ≥400 times/hour
7. Sealing knife: using copper material
8. Power supply: AC220V/50Hz
9. Power: 1.7KW
10. Equipment weight: 35Kg