This equipment is mainly suitable for pouch packaging (medium and small size) lithium batteries after bayonet piercing, vacuum and hot press packaging. The head is made of copper material, which has good heat transfer effect and saves power consumption, improves work efficiency, and saves energy compared to similar products ; The pressure of the upper and lower heads can be adjusted by the pressure regulating valve to meet the requirements of different process parameters

Equipment Feature:

With automatic puncture function, waste liquid recovery device, cover cavity is driven by cylinder, guided by linear guide sleeve, flexible up and down movement, accurate guidance to ensure product tightness requirements;
 
Index:
 
1. The cavity is made of aluminum alloy, which is corrosion resistant and has a firm structure;
2. The vacuum degree can be adjusted within -90Kpa～0 (the buyer shall provide the vacuum pump);
3. Head temperature: room temperature～250℃, temperature adjustable;
4. Temperature control accuracy: ±3℃;
5. Heat sealing pressure: 0～7Kg/cm2 adjustable;
6. Heat sealing time: adjustable from 0 to 99 seconds;
7. Edge banding width: 5mm (according to customer requirements);
8. Parallelism of the head: using triple carbonless copy paper, the pressure of the head is 0.6MPa, and the seal is uniform when the temperature is 200℃.
9. Air consumption: about 0.2L compressed gas/each time.
10. Air compressor working speed: ≥180 times/h
11. Power: Using 800w heating tube, the power consumption is about 1.6KW when heating.
12. Power supply: 220V/50Hz;
13. Power: 1.7KW;
14. Compressed air source: 0.6～0.8Mpa;