High voltage and high capacity tester
5.0
Read 351 reviewsInput PowerAC220V±10%、50/HZVoltageTest range10-100VPrecision±(0.2% of reading+0.2% of range)CurrentCharging range0-20000mAPrecision±(0.2% of reading+0.2% of range)Discharge range0-40000mAPrecision±(0.2% of reading+0.2% of range)ChargingConstant Voltage Cut-off CurrentMin 20mAC
17 people are viewing this right now
| Input Power | AC220V±10%、50/HZ | |
| Voltage | Test range | 10-100V |
| Precision | ±(0.2% of reading+0.2% of range) | |
| Current | Charging range | 0-20000mA |
| Precision | ±(0.2% of reading+0.2% of range) | |
| Discharge range | 0-40000mA | |
| Precision | ±(0.2% of reading+0.2% of range) | |
| Charging | Constant Voltage Cut-off Current | Min 20mA |
| Capacity | Precision | ±1‰ |
| Time | Inspection time | Real-time<2S |
| Timing range | 0-999 h/step | |
| Data recording intervals | ≥5S | |
| Median version | 1.1 series | |
| Charge | Charging mode | Constant current constant voltage charge |
| Cut-off condition | C, V, relative time, Overcharge Protection | |
| Discharge | Discharging mode | Constant-current discharge |
| Cut-off condition | V, relative time, Over-protection | |
| Circulate | Cycle measurement range | 1-999 times |
| Number of single-cycle steps | 100 | |
| Voltage and current detection sampling | Four wire connections | |
| Noise | <50dB | |
| Data base | My SQL database management of test data | |
| PC Communication | Based on TCP/IP protocol, serial port | |
| Data output mode | EXCEL, TXT,chart | |
| Communication Interface | Network | |
| Number of corridors per cabinet | 12 | |