Compressed Air Machine GN-CA-40A
5.0
Read 151 reviewsIntroductionThis design has the following features:1) The lubricant form a film between rotors ensuring a seal between the rotors2) The lubricant reduces noise from high frequency compression.3) The lubricant absorbs compression heat.Technical parameterAir displacement: 4.5m3
17 people are viewing this right now
Introduction
This design has the following features:
1) The lubricant form a film between rotors ensuring a seal between the rotors
2) The lubricant reduces noise from high frequency compression.
3) The lubricant absorbs compression heat.
Technical parameter
Air displacement: 4.5m3/min
Pressure at expulsion: 0.8Mpa
Power: 30KW/40HP
Diameter of air outlet diameter：G1″
Exterior size L*W*H(mm): 900*900*1120
Size of cooling inlet L*W(mm): 502*635
Size of cooling outlet L*W(mm): 545*645
Diameter of cable inlet(mm): D50
Wind volume of room M3 /h: 7800
Inlet size of room(㎡): 0.6
Outlet size of room(㎡): 0.36
You May Also Like
Cooling system
Cooling Drying Machine GN-CD-6F
Air compressor
Compressed Air Machine GN-CA-40A
Vacuum pump
Vacuum Pump GN-HDLG140
recycling system
Recycling System for NMP GN-TRD-R3/1000
Workshop dehumidification system
