Automatic stacking machine GN-DP300A

This device uses the manipulator left and right to move, in the two poles limit to pick up the electrode material, in the middle position alternately put the materials to stack, and simultaneously completes the Z-shaped folding of seperatorduring the left and right movement. So back and forth to fin

17 people are viewing this right now

This device uses the manipulator left and right to move, in the two poles limit to pick up the electrode material, in the middle position alternately put the materials to stack, and simultaneously completes the Z-shaped folding of seperator
during the left and right movement. So back and forth to finish the entire core’s stacking and assembling.The manipulator adopts linear servo motion module achieving high speed, smooth and accuracy.Separator put materials with constant tension, and in the process of putting materials, there is a correction mechanism to control the neatly consistent discharge. The electrode silo adopts linear servo motion module to convert different electrode sheets.

 Mainly used for lithium ion battery pouch battery in automatic production line

            ItemGN-DP300A
SizeThickness H(mm)8~20

Width W(mm)200~280

Length L(mm)200~280

Tab length Q(mm)Q≤30

Tab width (mm)≤50



Basic parameters:
1. The electrode transfer is controlled by a precision servo motor to ensure the accurate positioning of the stacking;
2. The electrode bending anti-double piece device can avoid the phenomenon of sucking multiple electrode and stripping electrode at a time
3. The electrode is pre-positioned twice, and the alignment device can ensure that the eectrode can be accurately positioned
4. Separator correction device can ensure that the separator can be accurately aligned
5. The automatic blowing ion wind device of the material box makes the electrode automatically float away to ensure that the electrode will not suck too much
6. The secondary aligning air blowing and dust removal device can ensure that there is no dust when the electrode are stacked
7. The positive and negative electrode plate lifting device ensures that the positive and negative electrode are always at the same height;
8. The separator unwinding has a constant tension function to ensure that the separator tension is basically constant during thestacking process;
9. The separator is automatically cut off;
10. Automatic battery tail winding
11.Automatic stick glue on the battery cell


You May Also Like

Semi-auto/ auto stacking machine

Semi-auto stacking machine GN-DP300-M

Vacuum oven/ high vacuum oven

Three Layer Vacuum Oven with PLC

Vacuum oven/ high vacuum oven

Three Layer Vacuum Oven without PLC

Vacuum oven/ high vacuum oven

High vacuum oven

Automatic film sticking machine(PET protecting fil

Lithium battery automatic film sticking machine(PET protecting film)

Code print machine

Automatic code printer

Automatic sealing machine (Top and Side sealing)

Automatic Top and Side heat sealing machine

Pouch cell case forming machine(with mold)

Al laminated film forming machine (with forming mold)