Manual Punching Machine
5.0
Read 13 reviewsThe manual punching machine is researched and designed by our company which is used for cutting various materials(thin metal foil,electrode,separator,etc) in the battery industry. The equipment has fine workmanship, and the resulting discs has no burrs and no indentation after punching, the cutting die can be replaced to achieve different sizes needs.
17 people are viewing this right now
The manual punching machine is researched and designed by our company which is used for cutting various materials(thin metal foil,electrode,separator,etc) in the battery industry. The equipment has fine workmanship, and the resulting discs has no burrs and no indentation after punching, the cutting die can be replaced to achieve different sizes needs.
Equipped with different size die, it can achieve sheet material cutting and dropping. The design of this machine is small, flexible and convenient. It is very suitable for 0.01~0.5mm thickness battery cathode,anode electrode and separator cutting . Can be easily accessed through a glove box
| 1. Can pass freely through the glove box over Φ200mm |
| 2. The body is made of rust-proof aluminum alloy |
| 3. Manual pressure ≥300Kg |
| 4. Pressing shaft stroke Max. 20mm |
| 5. Can punch 0.01~0.5mm thick sheet materials, all lithium battery separator and electrode can be punched |
| 6. Work surface :L140mm x W80mm |
| 7. The size of punching die can be Φ3~24mm,the usual size:10/12/14/15/16/19/20mm |
| 8. Standard die size : Φ12mm and Φ16mm |
| 9. Installation size (please check product dimensions and drawing) |
| 10. Weight: about 6K |
You May Also Like
mill machine
Lab Planetary ball mill
puching machine
