Conductive Carbon Black Super P Li
5.0
Read 293 reviewsSuper p has always been an important additive for lithium-ion battery electrode. Its function is to improve the electron transmission between the active material coating area of electrode and the current collector, reduce the interface contact resistance of the battery, and achieve depolarization. D
17 people are viewing this right now
Super p has always been an important additive for lithium-ion battery electrode. Its function is to improve the electron transmission between the active material coating area of electrode and the current collector, reduce the interface contact resistance of the battery, and achieve depolarization. Due to its large BET surface area and high liquid absorption rate, it can improve the liquid holding capacity of the electrode.
| Specifications | Appearance | Powder |
| Color | Black | |
| Moisture | 600-800ppm | |
| Sulfur content | 150-250mmp | |
| Density | 140-180kg/m3 | |
| Surface area | 45-65m2 /g | |
| Iron | 2-5ppm | |
| Ph | 6-7 | |
| Adsorption stiffness value | 30-36ml/5g |
Suggestions for use:
(1) It is recommended to use 1.8-3.0% of the total dry powder for the positive electrode slurry, and 0.8-1.5% of the total dry powder for the negative electrode slurry.
(2) Add to the glue and stir. Do not vacuum before soaking. The linear speed of stirring is 12-18m/s, and the stirring time is 360-420min.
(3) If the package has not been used after unpacking, it should be sealed in time, and it is forbidden to open the vacuum if it needs to be dried.
You May Also Like
Other auxiliary materials
PVC heat-shrinkable sleeve
Other auxiliary materials
PET Protection Film
Other auxiliary materials
PET Film
Other auxiliary materials
Aluminum foil tape
Other auxiliary materials
Mylar Film
Other auxiliary materials
Lithium ion battery green strapping tape
Other auxiliary materials
Brown High Temperature Adhesive Tape
Other necessary materials
