Lithium ion battery Separator
Separator IntroductionIn the structure of the lithium battery, the separator is one of the key internal components. The performance of the separator determines the interface structure and internal resistance of the battery, which directly affects the capacity, cycle and safety performance of the bat
17 people are viewing this right now
Separator Introduction
In the structure of the lithium battery, the separator is one of the key internal components. The performance of the separator determines the interface structure and internal resistance of the battery, which directly affects the capacity, cycle and safety performance of the battery. A separator with excellent performance plays an important role in improving the overall performance of the battery. The main function of the separator is to separate the anode and cathode electrodes of the battery to prevent short-circuiting due to contact between the two electrodes. In addition, it also has the function of allowing electrolyte ions to pass through. The separator material is non-conductive, and its physical and chemical properties have a great influence on the performance of the battery. Different types of batteries have different separators. For the lithium battery series, since the electrolyte is an organic solvent system, a separator material resistant to organic solvents is required. Generally, a high-strength thin-film polyolefin porous film is used.
PE & PP separators is used for lithium-ion battery manufacturers and researchers. The materials consist of Polymerfilm Separators that are either Polypropylene (PP) or Polyethylene (PE) based. contain micro and nano pores to provide excellent ion transportation capabilities within the li-ion battery.
Ceramic-coated variety for enhanced thermal deformation resistance and mechanical strength.
1) PE/PP single layer separator :
thickness | 12um,16um, 18um,20um, 25um |
porosity | 38~45% |
2) Ceramic-coated separator:
thickness | 16um |
Double side alumina coating thickness | 2um/each side |
porosity | 38% |
3) PP/PE/PP multilayer separator
thickness | 12um, 16um,18um,20um,25um |
porosity | 39~44% |