GELON LIB GROUP   EN | 中文
Tel:+8618669965529    Email:ekain@libgroup.net

Home > Product > Battery Production Line Equipments > Pouch cell core production equipment > Injection, forming equipment > Semi-automatic / automatic injection machine

Automatic electrolyte filling machine

Automatic electrolyte filling machine

Introduction:
1) This machine is mainly used for the automatic liquid injection and packaging process of pouch cell lithium-ion batteries. It can realize the functions of manual battery loading, weighing before liquid injection, automatic liquid injection, automatic standing, automatic vacuum sealing, weighing after liquid injection, manual discharging, etc.;
2) The equipment is placed in the drying room, and the outlet is connected to the drying room;
3) Manually place the battery on the turntable fixture;

Introduction:
1) This machine is mainly used for the automatic liquid injection and packaging process of pouch cell lithium-ion batteries. It can realize the functions of manual battery loading, weighing before liquid injection, automatic liquid injection, automatic standing, automatic vacuum sealing, weighing after liquid injection, manual discharging, etc.;
2) The equipment is placed in the drying room, and the outlet is connected to the drying room;
3) Manually place the battery on the turntable fixture;
 
Product specification:
 
  Item Mode(mm)
A(height) 150-300
B(battery core) 120-250
C(tab length) 15-50
D(width) 80-150
E(thickness) 6-15
Note: battery core diagram, final figure to be confirmed by both parties
 
Equipment technical parameters:
  1. njection station: 1 
2.Vacuum value during vacuum injection:-80Kpa;
3.Vacuum standing station: 2
4.Vacuum standing time:1~99S can be set
5.Vacuum value of standing cavity:-40Kpa,-60Kpa,-90Kpa(Standing cavity line and ball valve control);
6.Vacuum sealing station: 2
7.Sealing head width: 5mm
8.Seaing head operating temperature: MAX 250℃, Maximum temperature difference at each sealing head point :±5ºC;
9.Vacuum value of sealing Cavity:-90Kpa;
10.Equipment capacity: 4-6PPM
11.Excellent product rate :  99%(excluding defective incoming materials)
12: Equipment failure rate  ≤5%(Troubleshooting caused by equipment only);
  1. Injection accuracy requirements:±0.05g 
 Battery cell weight not exceeding 2.0 KG. after electrolyte injection
 
Technical parameters:
1. Equipment electrical: voltage 380V, current AC, single-phase, power 10KW
2. Compressed air: 6 standard atmospheres
3. Vacuum flow:350 m3 / h
4. Weight:About 2800Kg. The ratio of total weight to load-bearing area ≤500kg/M2.
5. Overall dimensions (approximately): Length: 8500; Width: 2280; Height: 2200 (MM)