Pouch Cell Semi-auto Stacking Machine

The equipment is mainly used to assemble the cathode and anode electrode of the lithium ion battery cell and the separator into a Z-shaped lamination to make the cell.Index:1. Applicable specifications: length L150-280, width W 80-170mm, thickness H 0-20mm;Tab length Q≤25mm2. Equipment speed:

17 people are viewing this right now

The equipment is mainly used to assemble the cathode and anode electrode of the lithium ion battery cell and the separator into a Z-shaped lamination to make the cell.


Index:
 
1. Applicable specifications: length L150-280, width W 80-170mm, thickness H 0-20mm;
Tab length Q≤25mm
2. Equipment speed: 1.5-1.8s/pcs;
3. Alignment accuracy of electrode and separator: center deviation ±0.3mm;
4.material requirements: the electrode coating must be uniform, the thickness error is less than 0.005mm, no wrinkling or bonding phenomenon; the length and width dimension error is less than ±0.2 mm, the wave edge is less than 1mm (does not affect the electrode positioning); the tabs are flat , No bumps, bumps, etc.; the separator needs to be rolled evenly, the width error is less than 0.1mm, and the tower error is less than 0.2mm; the diaphragm is rolled evenly, without obvious tower shape, wrinkles, warping, etc.;
5. The active tension of the separator is controlled during the lamination process to ensure a small extension and deformation of the separator;
6. Separator rectification to ensure the uniformity of separator unwinding, and the alignment accuracy is ±0.2mm;
7. Bad identification: identify missing pieces
8. The utilization rate is 95% (faults caused only by the machine), and the pass rate is 99% (defects caused by the machine only)

You May Also Like

Grading Machine

Grading machine

Second Sealing Machine

Pouch Cell Second Sealing Machine

Formation machine

Formation machine

Vacuum Stander

Vacuum Standing Box

Injection Machine

Liquid Injection Machine

Vacuum Oven

Vacuum Oven