Automatic Stacking Machine
5.0
Read 167 reviewsIn this automatic stacking machine, when the mechanical arm is moving from left to right, the electrode sheet material is picked up at the two limit positions, and the intermediate position is used for alternating feeding.The robot arm adopts linear servo motion module to achieve high speed, stabili
17 people are viewing this right now
In this automatic stacking machine, when the mechanical arm is moving from left to right, the electrode sheet material is picked up at the two limit positions, and the intermediate position is used for alternating feeding.The robot arm adopts linear servo motion module to achieve high speed, stability and accuracy.Diaphragm feeding adopts constant tension, and there is a deviation rectifying mechanism to control feeding in the feeding process.A linear servo motion module is used to convert different pole sheets in the pole stock bin.
Electrode sheet
| Length(not include tab)(mm) | 165/±0.5 |
Width(mm) | 70/±0.5 | |
Thickness(mm) | 0.06-0.3 | |
Stacking thickness | Thickness(mm) | 27 |
Separator | Width(mm) | Customer provision |
Thickness(mm) | ||
Max OD(mm) | φ250 | |
ID(mm) | φ76.2(3") | |
Specification | Stack frequency | (less than 200 is 0.8S/ single chip, less than 300 is 1.2S/ single chip) × layer number +auxiliary time |
Staking number | In customer requirements | |
Stacking layers number | Can be set within the range of height adaptation | |
Appearance | flat and no wrinkles | |
Finish | Automatic adhesive (1- 3) | |
Lay off | Manual lay off |