Automatic cathode electrode making machine
5.0
Read 200 reviewsThe equipment is a special production equipment made of lithium-ion cathode electrode, in the whole production process, it put coating and cutting of electrode hanging on the unreeled scroll.The rolled electrode automatic transport, delivery tab,tab automatic tape, weld tab, paste 1 protective tape,
17 people are viewing this right now
The equipment is a special production equipment made of lithium-ion cathode electrode, in the whole production process, it put coating and cutting of electrode hanging on the unreeled scroll.The rolled electrode automatic transport, delivery tab,tab automatic tape, weld tab, paste 1 protective tape, and the finished electrode automatic reel, to be into automatic winding machine
Material specifications
Material specifications on board:
Materials | Single chip length(mm) | Material width(mm) | Maximum diameter(mm) | Installation Diameter(mm) |
Anode electrode | 500~2000 | 50~75 | Φ400 | 3″ |
Cathode tab | 40~70 | 3~5 | Φ400 | 80mm |
Electrode protecting tape | 50~80 | 8~20 | φ200 | 3″ |
Equipment specifications
Basic specifications | Gas source pressure | 0.5-0.7Mpa, Gas Flow:100L/min |
Power supply | Singe phase AC220V,50HZ,4KW | |
Ambient temperature | -20°~+45° | |
Noise | < 80 DB | |
Size (length * width * height) | Main body(2190*950*1600mm) | |
Colour | Computer Ash (or Customer Designated) Computer Ash (or Customer Designated) | |
Weight of equipment | About 0.9 tons |
Technical parameters of equipment:
1.Production speed: 32-35ppm(Cathode 1 tab , 2 glue,electrode 700mm )
2.Tab Length Accuracy±0.3mm. Accuracy of tab in the direction position of electrode Walking belt±0.5mm. Tab exposure accuracy±0.5mm. Tape length and position accuracy±0.5mm
3.Winding Volume alignment±0.5 mm
4. Moving rate of equipment: ≥95%; qualification rate: ≥98%( Exclusion of incoming material)
5. Adopt gold energy ultrasonic welding machine (can be selected according to customer requirements). Ultrasonic welding machine is bridge fixed mode, the size of welding point is anode: 3*3*4 point shape, total length is 25 mm.