YOUR POSITION:HOME > PRODUCTS > Product categories > Li-ion battery R&D Equipment > Pouch Cells Preparation
Pouch Cells Preparation

Compact Heating Sealer for Sealing Laminated Aluminum Case of Pouch Cells - GN-1

GN-140 is a compact heating sealer for sealing aluminum-laminated films during pouch cell (polymer Li-Ion cell) case preparation. It can prepare the pouch cell for the injection of electrolyte by sealing the side and top of the pouch cell with tab.
Product Details

GN-140 is a compact heating sealer for sealing aluminum-laminated films during pouch cell (polymer Li-Ion cell) case preparation. It can prepare the pouch cell for the injection of electrolyte by sealing the side and top of the pouch cell with tab.

SPECIFICATIONS:

Model

GN-140

Power Supply

220V 50/60Hz Single Phase

Sealing Length

190 mm Max.

Sealing Width

3.2 mm (Can be customized upon request with an extra charge of $1000)

Sealing Thickness

0.19 - 0.3 mm

Max. Power

600W

Sealing Pressure

0.5 - 0.7 MPa (0 - 99 psi) adjustable
(2 gallon air compressor is required, but not included . pls order at your store or the related product below )

Sealing Temperature

50 - 300 °C adjustable with controlling accuracy +/-2 °C

Sealing Blade Type

Soft sealing blade (blade with rubber, good for Al case sealing and case with tab in between)

Air Consumption

0.09 L / Sealing

Heating Timer

0 - 99 Seconds Adjustable

Warranty

One Year limited warranty with lifetime support

Application Notes

· Suggested Sealing Parameter:
Upper Heating Blade Temperature: 180°C

· Lower Heating Blade Temperature: 180°C

Product Dimensions

320mm(L) x 320mm(W) x 500mm(H)

Net Weight

70 lbs

Shipping Weight

120 lbs